205041 eToilet Nozzle Replacement
| This information will assist you with the removal for cleaning or replacement of the Moen eToilet Nozzle. |
How to Remove the eToilet Nozzle: |
Step 1: When powered on, and not seated: Press the "Nozzle Clean" button on the remote controller, and the washer will automatically extend.
Step 2: You may gently hold the stainless steel pipe with one hand and carefully wiggle the Nozzle left to right while pulling it outward with the other hand.
How to Re-Install eToilet Nozzle: |
Step 1: Reinstall by gently reinserting the nozzle into the stainless steel pipe with the small holes pointing upward. Push it into the sleeve until it fully snaps into place.
Image illustrates how far in the the nozzle should be installed when correctly repositioned.
Step 2: Press the "Nozzle Clean" button on the remote controller to retract the nozzle tip.
