Llaves de baño con un sol maneral: Conexión directa 1269

• Gently pry the Plug Button from the back of the Handle (2). 
• Insert a 3/32" Hex Wrench into the hole on the back of the Handle (2) and turn the Hex Wrench counter-clockwise to loosen the Hex Screw (1) until the Handle (2) se levante. 
• Insert a small Flat Head Screwdriver between the finished Handle Dome (3) and the Faucet, push upwards to remove. There are six tabs on the Handle Dome (3) that connect it to the Faucet Body. 

Note: If you are disassembling your handle, to replace the cartridge 1269, see 1269 Cartridge: Single Handle Bathroom Faucets for further information.

• Line the six tabs on the Handle Dome (4) with the notches in the faucet body and snap the Handle Dome (4) into place.
• Place the Handle (3) on top of the stem of the Cartridge
• Using the 3/32" Hex Wrench, turn the Hex Screw (2) clockwise to tighten. 
• Insert the Plug Button and turn your water supply on.